Wednesday, August 7th, 2013
by Littman Bros Lighting
Ceiling fans add great value to your living space as well as help maintain a consistent temperature year round. Ceiling fans are an energy efficient solution that provides comfort at a fraction of the cost of heating or central air alone. No matter what the space within your home, there is a ceiling fan that is the appropriate size.
When you look at the overall aesthetics and airflow efficiency, the standard fan can be used in a much smaller space than typically thought. Standard ceiling fan sizes 52 inch to 54 inch can be used in a space that is only 144 square feet, all the way up to 255 square foot space.
What if you have a very tiny space? A 36 inch ceiling fan is appropriate for a small closet up to 75 square feet and a small to medium room of about 76 to 144 square feet can handle a 42 inch to 50 inch fan. Larger spaces can take up to a 72 inch fan but the ceiling height starts to factor into this decision – a 72 inch ceiling fan installed on a ceiling shorter than 14 inches, visually, feels like it is falling down on top of you; if you have a space larger than 400 square feet with a lower ceiling, go for multiple fans around 52 to 54 inches. A room larger than 400 square feet with a high ceiling should have a 72 inch fan.
Wednesday, July 31st, 2013
by Littman Bros Lighting
Few things are more annoying than a rattling fan motor or a wobbling fan; it can also be scary when your fan shakes above you. While most new high-end ceiling fans come pre-balanced, others level themselves when run on high for a few hours. In few instances it may be necessary to make some adjustments – you may have an older fan that has come off kilter. So how do you balance your ceiling fan?
First make sure all your screws are tight and nothing has loosened over time. Than you will want to make sure all the blades are straight – measure from the ceiling down to the blade, in order to make sure the same side of all blades are measured. Next, using a fan balancing kit, you will need to determine which blade needs more weight. Place the balancing clip halfway between the blade tip and blade holder and run the fan – do this with all blades and mark which blade makes the biggest difference. You will then need to fine tune the placement of the weight by moving the clip in and out, on the blade, until it is balanced. Once the weight location has been determined, peel off the paper from the weight adhesive and place it on the top center of the blade, directly inline with the balancing clip. From here you should have a working, better balanced fan for your room; if the fan is still wobbly or continues to make noise, attempt this process again with the balancing kit or consult a lighting professional.